• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

my simple and DIY modes fr. NE

HKholic

Member
hi bro im using M8x1.25 x 195mm long std. stud bolt until now , but you can use normal stud if you're just stroker with stock bore around 150cc, spacer i used 4.5 to 5mm alloy base gasket, during that time i can't find 5mm 1pc of gasket only 1mm to 3mm so i just used 2+3mm, :) keep goin bro.. looks holding and firing a gun i'm gun fanatic too,:) even your username pistol brand he he he , i owned both beretta92 fs and paraX1640 limited,
welcome sa thread bro,
Appreciate the info Axon. Yes, I enjoy guns A LOT! Unfortunately I had to leave them all in the States :censored:. Nothing like shooting 7.62 nato on full auto! :D
 

aizarn20

Super Veteran
bart99 ah medyo nalito lang ako sa term mo ano yun titanium carbide baka kasi mag ka iba lang tayo ng terminology he he he the pix,

View attachment 10943 sa dami nito di alam na kung alin yun sinasabi mo na titanium carbide hindi naman siguro yun wrist watch ko, kasi nun nabili ko wrist watch ko naka lagay titanium ion carbide eco drive he he he...
View attachment 10944 eto yun ilang madalas kong gamitin sa lathe...all side nagagamit except sa pinakamaliit cutter na kasi yun ,
View attachment 10945 add ko na rin set ng drill bit , so there is no reason na hindi mo magagawa ang nagagawa ng ibang tao di ba? its only a matter of time, no room for error ,but people said nobody is perfect f..k that phrase sa ugali lang ng tao inaapply yan hindi sa propesyon, if everyone having this phrase and still applying it to their job,when they are failed , wala na sigurong nasisisante o nateterminate sa trabaho, yes its acceptable but next in the morning find a new employer to hire you, because you employer telling you this" we being hired and being paid to build a machine, not to destroy it...":D...pero mga bro motto ko lang sa buhay yan, he he he so kailangan hindi tayo nag kakamali hindi ko sinabi na kailangan PERFECTO...oops:oops: im still being carried away sa kabilang thread.....

sir anu pong tawag sa may square triangle?thanks
 

Ginger

Super Veteran
bro sa tools gamit GEDORE lahat ng mga spanner ko yan ang tatak ewan ko lang kung mi makukuha ka sa atin sa net meron pero medyo pricey, german made eh, pero sure ball lahat ng sukat, and yung special tools ko mga ginawa ko lang yan bakit pa ko bibili kung kaya ko naman gawin he he he, and beside i can operate most of the machine used to made a tools, he he he....:) BUFFALO mukhang ok kesa sa stanley,

baka nan sir pwd mag pagawa sayo nang special tools heheheh!!!! :p
 

jk02

Member
tgal npo d nkkpagupdate ni ts sa thread n to aaa? ktpos q lng po basahin lahat dami q ntutunan sa blog nia haha!! sana mkpguptade cia ulit!:)
 

axon

Super Veteran
hi guys its been long time since i check this thread and signed in:( , vinz0r anong bago dre? my last leave ko skip ako sa sniper ko at more on tuning sa oto ko, nag change engine ako non-VTEC to VTEC from CARB to EFI , kaya medyo time consuming , last thing i made is puting a hi speed con rod to faito crank (pin 15 plus 9 ) using piston 65 same bore kit of x1r hanapin ko pa yun mga pix cam phone lang tanda ko , review later on guys ,

for those who send me pm sorry if i did not reply it on time but fire it up here instead, and if its technical matter, post it here for the benefits of other readers too, specially dudes from malaysia...

keep safe , life is good :)
 

rowan

Super Veteran
hi guys its been long time since i check this thread and signed in:( , vinz0r anong bago dre? my last leave ko skip ako sa sniper ko at more on tuning sa oto ko, nag change engine ako non-VTEC to VTEC from CARB to EFI , kaya medyo time consuming , last thing i made is puting a hi speed con rod to faito crank (pin 15 plus 9 ) using piston 65 same bore kit of x1r hanapin ko pa yun mga pix cam phone lang tanda ko , review later on guys ,

for those who send me pm sorry if i did not reply it on time but fire it up here instead, and if its technical matter, post it here for the benefits of other readers too, specially dudes from malaysia...

keep safe , life is good :)

welcome back paps tagal mo nawala.. wow heavy load hehehe
 

Sniper 03

Veteran
sa totoo lang mga bro, di natin kailangan ng mga mga shop at mikaniko, sa liit ng makina ng motor at isang piston lang,

kailangan lang complete tools, at guide na lang ng mga experience friends at knowledge sa mechinical thing at most yun manual,...

samahan nyo pa ng mga veteran na ka forum natin d2 sa t135 he he he he ...yun tunay na veteran lang ha.....ha ha ha :mrgreen: ..

korek...masarap ang feeling at challenging , ang katwiran ko kasi akin to, paki nyo kung masira ko, ha ha ha ha eh di bumili uli ng bago...
Tam
sa totoo lang mga bro, di natin kailangan ng mga mga shop at mikaniko, sa liit ng makina ng motor at isang piston lang,

kailangan lang complete tools, at guide na lang ng mga experience friends at knowledge sa mechinical thing at most yun manual,...

samahan nyo pa ng mga veteran na ka forum natin d2 sa t135 he he he he ...yun tunay na veteran lang ha.....ha ha ha :mrgreen: ..

korek...masarap ang feeling at challenging , ang katwiran ko kasi akin to, paki nyo kung masira ko, ha ha ha ha eh di bumili uli ng bago...
a tama tama :) hehe ganun din ako haha. Explore lang ng explore hehe bossing kamusta na yung engine mo ngayon may mga naging problema ba? Palono ko na din ito by november any feed back after instalation? Ilang taon narin nung na post itong thread tnx
 

Sniper 03

Veteran
ng saya saya naman dito mga master wow dami ko natutunan! Hindi ko pa nababsa lahat nasa page 12 palang ako hahaha... Nice info sir sir axon :):dance:
 

Sniper 03

Veteran
@axon ila
iba yun ikaw mismo ang nag seset up ng motor mo, gradually nakikita mo yun improvement kesa pupunta ka sa shop at ipakakabit sa kanila eh paano pag sablay ang kabit at ang katwiran NOBODY'S PERFECT , eh di ikaw na lang, kung pag sablay man you can used that phrase to your self because you did not pay anyone ,at sumabog man ok lang ikaw ang naka sira ng mc mo, mas masakit yun ibang tao na binabayaran natin ang nakasira right? thats my point bro, hope nakuha na ng mga newbie yun motto ko , iba yun ikaw mismo nag kabit, meron nakaipit na proud effort lagi di ba kahit na oem pa yan he he he :)
hehe tama super happy ako sa thread na ito hahaha, IM PROUD TO BE DIY hehehe thaks sir axon sa lot of ideas
 
Top