• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

What's The Latest Thing You've Done To Your Bike?

MickO_HCMC

New Member
You fitted 6 speed? which brand? CMS racing 6 speed?

current specs of my bike:
Yamaha Exciter (T135 in Vietnam) 183cc
UMA super-head (sport) 23mm inlet/20mm exhaust
UMA cam
63mm Malossi bore kit
Malossi Electric coolant pump
28mm PWK carb
UMA Racing coil and lead
Iridium spark plug
Shorai Lithium Ion battery
BMC Pod air filter
Stainless header pipe (with modified standard muffler approx. 33mm end bore)
Oil cooler (KTL Tecnic)
Stainless steel oil filter (FLO)
Racing clutch springs (Std. plates) (fitting UMA Racing Hyper clutch soon)
UMA / IMC RCDI
Transmission Standard 5 speed
15F/41R sprockets (Hoddaka)
Chain (428 VX DID)Standard front forks
295mm front disk (RB) with standard caliper
Standard swing arm (fitting HKS banana soon)
RPM rear mono shock (rebound adjust)
std. rear disk and caliper
Tires F; 70/90 R; 100/80 Michelin Pilot Street
 

cr0wer

New Member
You fitted 6 speed? which brand? CMS racing 6 speed?

current specs of my bike:
Yamaha Exciter (T135 in Vietnam) 183cc
UMA super-head (sport) 23mm inlet/20mm exhaust
UMA cam
63mm Malossi bore kit
Malossi Electric coolant pump
28mm PWK carb
UMA Racing coil and lead
Iridium spark plug
Shorai Lithium Ion battery
BMC Pod air filter
Stainless header pipe (with modified standard muffler approx. 33mm end bore)
Oil cooler (KTL Tecnic)
Stainless steel oil filter (FLO)
Racing clutch springs (Std. plates) (fitting UMA Racing Hyper clutch soon)
UMA / IMC RCDI
Transmission Standard 5 speed
15F/41R sprockets (Hoddaka)
Chain (428 VX DID)Standard front forks
295mm front disk (RB) with standard caliper
Standard swing arm (fitting HKS banana soon)
RPM rear mono shock (rebound adjust)
std. rear disk and caliper
Tires F; 70/90 R; 100/80 Michelin Pilot Street
cms 6speed but cust0m teeth.. rati0 f0ll0w my b0dy weight 83kg...
head : 0riginal with 19/22 valve p0rt p0lish
cylinder : 62mm
crankshaft : jack 2mm
carb : 32mm uma 0pen p0d
cdi : uma IMC
camshaft : cust0m 5.8mm 330 degree - setting/marking with pr0degree wheel
exhaust : 0riginal full cust0m
tire & rim : F 80/90 R90/80 & std 5s
spr0cket & chain: 15/35 & 428
starter : kick 0nly
and etc in engine..
 
Top